Aluminum Ceiling Tiles Selection Method

1, Pick the raw materials
The quality of the aluminum ceiling tiles is largely determined by the materials it uses. At present, the raw materials used in the aluminum gussets on the market mainly include aluminum-magnesium alloys, aluminum-manganese alloys, and aluminum alloys. In the meantime, the aluminum-magnesium alloy is the best. The biggest advantage of this data is that it can resist oxidation. Together with the manganese content, it has the necessary strength and rigidity. It is the most ideal material for smallpox. Followed by aluminum-manganese alloy, the strength and stiffness of this data is slightly better than that of aluminum-magnesium alloy, but the oxidation resistance is slightly lower than that of aluminum-magnesium alloy. If both sides are protected, it can basically handle the defects of aluminum oxide and magnesium alloy.

2, Select technology
According to the way of processing the data, it can be divided into spraying board, roller coating board and laminating board. In the meantime, the sprayed plate has shortcomings such as short service life and simple chromatic aberration; the roller coated plate has uniform appearance, lubrication, no leakage coating, shrinkage, scratching, falling, etc.; the outer surface of the laminated plate is a layer of PVC film with appearance posting Strong, no wrinkles, scratches, drops, leaks and other strengths.

3, See the thickness
In the small market, you can often hear the salesperson say: The thicker the gusset is, of course, the thicker the gusset is. In fact, the aluminum ceiling tiles is not as thick as possible, and the thickness is the hardness of the gusset. To ensure that if the hardness is not good, the gusset will be deformed; but the 0.6 mm or 0.7 mm thick gusset in the home decoration is completely sufficient, and those slabs of aluminum are not useful because of the poor raw materials.