Aluminum ceiling Decoration acceptance considerations

The aluminum ceiling and the matching keel are formed by metal sheet, and the connection pattern of the aluminum ceiling is inserted. In order to ensure that the connection is not loose, the connection structure should be relatively accurate, and the adjustment range is small. The requirements are higher. The installation level directly determines the effect of use. Many users say that when the cheap aluminum plate is purchased for less than half a year, the problem of the connection between the plate and the keel appears. Therefore, I remind you that if the top frame is not installed properly or the keel or aluminum ceiling is deformed, it is installed. In the middle of the hard plug, etc. will cause the ceiling of the aluminum ceiling to be uneven. Here, I suggest you buy a brand of aluminum ceiling with good quality and perfect after-sales service.

In order to avoid the unevenness of the aluminum ceiling, the following points should be noted in the decoration construction process: 

(l) The purchased aluminum ceiling and the matching keel and fittings shall conform to the product quality requirements and shall not have bending deformation. 

(2) During the transportation and stacking process, the aluminum ceiling should be placed flat, can not be pressed, and avoid the erosion of high temperature and harmful substances. 

(3) The keel is installed flat and the spacing deviation should be controlled within 1.5 meters. 

(4) When installing aluminum ceiling, if there is deviation in size, it should be adjusted first and then inserted in order, and must not be hard inserted to prevent deformation. 

(5) Large-scale lamps, exhaust fans, etc. should be fixed separately as keel and should not be placed directly on the aluminum ceiling. As long as you can pay attention to the above five points, you can basically achieve the solid effect of the aluminum ceiling, and avoid unevenness. During the construction process, observation and inspection may be carried out by means of a ruler or a hand test if necessary.