Views: 7 Author: Site Editor Publish Time: 2018-08-16 Origin: Site Inquire
Conventional aluminum curtain wall panel customization: determine the size The aluminum curtain wall panel is widely used in commercial decoration. However, due to the different designs, it is often necessary to customize it separately. The specific requirements can be provided to the manufacturer and can be produced in a short period of time. When submitting custom requirements, the most basic is the size of the aluminum curtain wall panel, including the length of the data and the thickness requirements. In general, the larger the area of the curtain wall panel, the thicker the thickness is required to ensure stability after installation. If it is a very large size, it can be reinforced by means of reinforcement, which can save a certain material cost.
Conventional aluminum curtain wall panel customization: determining appearance requirements The aluminum panels used in the decoration are often beautified by punching public welfare. This can significantly provide ventilation and ventilation characteristics, but also ensure the lighting inside the building and reduce the weight of the board. There are various molds in the manufacturer that punch the aluminum plate, and the customer can select a specific shape according to the design requirements, including the shape and density of the hole. If it is a special hole, the manufacturer can also customize the mold separately, but if the batch is too small, it will lead to price increase.
Conventional aluminum curtain wall panel customization: determine the coating variety The aluminum panel for indoor applications can be used with ordinary paint. In the case of an aluminum panel used as a curtain wall, in order to ensure a sufficient service life, a fluorocarbon paint is generally used. Fluorocarbon paint is currently the best performance coating, but the price will be more expensive. At the same time, the fluorocarbon paint also needs to be matched with the imported spray gun when it is used in the drawing, and it will bring certain hardware loss. These costs will ultimately need to be borne by the customer.